vaping mod

Choosing the right Battery for your Mod

If you are interested to learn about batteries and obscure references to wattage, discharge rate, Amperage, and Ohmns, just join a vaping convention. For a beginner, the subject may be a bit impenetrable. In any case, you can enjoy vaping safely without diving into the subject. This post will help you head in the appropriate direction.


When choosing ego power unit for your vaping mod, there are two important specifications to look for:

  • Capacity of the battery
  • Continuous discharge

Therefore, when selecting a battery, which is suited to type of vaping, you should go for batteries that have a low discharge. Usually, high discharge batteries have a low capacity.vaping mod battery

Battery sliding scale

You need to consider two important factors when choosing batteries for vaping mod. Remember that there is a symbiotic balance between the two specifications. These include:

  • Density – This means the duration in which the battery is going to last. This is measured in maH or mAh.
  • Discharge – This is simply the rate of current that battery can deliver. It is considered as the power because of the high current and high wattage output.

In an ideal world, you should choose a battery with highest amperage and highest mAh possible. Unfortunately, our technology is yet to get there. Also, the small size means that there is a tradeoff between high current and capacity.

When you choose a high power battery, it means you ought to accept lower capacity. The truth is that the battery sliding scale is unavoidable and non-negotiable. If it has high density, then it means it has a low discharge rate. Nowadays, batteries are just getting better and soon we will have great batteries.


This is an important consideration. You may have heard about vaping explosions. You will be surprised to note that it is not the battery which is used.

Important tips

vaping woman

When choosing a battery for your vaping mod, you should follow the following three steps:

  1. Look at the mod and see whether it is a mechanical mod. You should note that mechanical mods are meant for advanced users only that have adequate knowledge of batteries.
  2. Look at battery type chart and ensure you choose the right one. If you are not sure, avoid picking mechanical mods as they draw a lot of current and require batteries.
  3. Look for a great battery in its class. With good research, you can find several options.

Reliant Finishing Systems: Overview

Reliant Finishing Systems produces state of the art powder coating equipment that is quite a competitive price wise. The finishing system delivers effective performance in a two process fashion that involves powder coating and curing.

In case your Reliant Finishing System equipment gets issues, there is a standby service crew to be sent for repair. However, this is a rare occurrence since Reliance Finishing Systems are built with a high level of reliability. Check on Reliant Finishing Systems News.

Working process of reliant finishing system

project siteReliant Finishing Systems employs the use of two devices; the spraying gun and the curing oven. For better results, you will need first to preheat the equipment of interest. This is to allow strong bonding between the equipment and the paint during spraying

Then comfortably using your desired color powder you can spray onto the equipment of interest with a Reliant Finishing gun spray. When through the equipment is placed into a curing oven to allow melting of the paint. On melting, a firm protective coating is formed.

This coat will remain for years to protect your equipment from rust, dust, and harm. Once you give it a try, you will always choose Reliant Finishing Systems. Use of powder coating means durability of the coat and environmental friendliness.

The advantages of reliant finishing systems

  • Utilizes use of powder paint that is more durable and resistant from abrasion and chemical damage
  • The powder paint is also cost-effective and would assist you to reap massive profit returns
  • Environmentally powder paint use is safer than liquid paint
  • It is easier and more efficient to use powder coating

The disadvantages of reliant finishing systems

  • Could be time-consuming especially when you need to achieve special effects since you require multiple steps of spraying and curing.
  •  Could not be used with heat-sensitive equipment.
  • Spraying immobile equipment is quite technical compared with liquid paints

How much does Reliant Finishing System Cost

A pound of Reliant Finishing Systems Powder costs only $ 4. this is the only consumable you will have to buy. You can then incur a onetime cost of the spraying gun and the curing oven. A bench top oven will cost you less than $150 and a spraying gun approximately $50.

What are the precautions when using reliant finishing system

working siteEnsure you clean the equipment you want to coat before spraying it. For example, iron needs to be sand-blasted to remove rust whereas for aluminum you need to remove the oxidation layer. Cleaning reveals a suitable surface for paint adhesion.

Cleaning is usually a three-step process. It involves blasting the metal with sand, washing it with pressure and wiping the surface. Once through use Reliant Finishing Systems gun to spray powder paint and then cure your equipment in the oven.

Final verdict

Science backs up the use of Powder coating as a more reliable and environmentally safe way of doing paint finishing compared to liquid paints. The powder coating is also vouched for its cost-effectiveness and fewer time requirements.

Reliant Finishing Systems, therefore, bring you quality finishing you so much desire. You can now buy uncoated products and coat them by yourself before you display them for sale. This will enable you to reap maximum profit and offer unmatched quality to your clients.…